Local roofersFree to callNo forms to fill out
Serving Oradell and nearby towns
Menu
Call (551) 383-2310
Shingle Roofing

Shingle Roof Installation Oradell, NJ

A Oradell roofer can help you pick between 3-tab, architectural and impact-resistant shingles and install the full system beneath them, whether the roof is on a new home, an addition or a reroof. Call (551) 383-2310 to reach a local roofer.

What you see from the street is maybe half of a shingle roof. Underneath sit the drip edge, an ice and water shield along the eaves and in the valleys, underlayment across the deck and a starter strip that seals the first course. Then come the flashing details and the ventilation, which decide whether the roof stays dry and how long the shingles last.

Shingle choice sets the look, the wind rating and the life of the roof. 3-tab shingles are thin and uniform, and architectural shingles are thicker laminated shingles with a textured, shadowed look and higher wind ratings. Impact-resistant shingles rated Class 4 under the UL 2218 test are an option where hail is common, and some insurers treat them differently, so ask yours.

Not every roof can take shingles. The usual minimum for shingles is a 2 in 12 pitch, with a double layer of underlayment on slopes up to 4 in 12. Porches and low additions often need a different material where they tie into the main roof.

Many shingle roof installation calls in Oradell also turn up a need for shingle roof replacement or roof installation.

Need shingle roof installation in Oradell? Call (551) 383-2310 and describe the problem to a roofer who works in Oradell.

Call now
The process

Building a shingle roof layer by layer

A shingle roof is built from the eaves up, layer over layer.

  1. Prepare the deck

    Sheathing has to be flat, dry and well fastened, so loose sheets are renailed and damaged ones replaced. Shingles laid on a bad deck show every flaw.

  2. Ice barrier first

    The eaves get drip edge and a band of ice and water shield, and the valleys get a full-length strip. Where ice dams form, codes call for the barrier to reach beyond the warm wall line.

  3. Cover the deck

    The rest of the deck is covered in underlayment, lapped so each row sheds onto the one below, with rake drip edge on top. Most roofers now use synthetic, which resists tearing and lies flatter than felt.

  4. Start at the eaves

    The starter row seals the bottom edge and rakes of the roof. Skipping it is a common cause of edge blow-offs.

  5. Install the field

    The field is shingled with correct offsets and nailing, with step flashing, kickout flashing and pipe boots set as the courses reach them. Valleys are either open metal or closed-cut shingle valleys.

  6. Ridge vent

    Exhaust at the ridge is matched to intake at the soffits so air moves through the attic. Too little intake makes a ridge vent pull air the wrong way.

What is included

What a new shingle roof includes

Starter strip

Starter shingles and metal drip edge finish the eaves and rakes for a clean, sealed edge.

Synthetic underlayment

Underlayment rows are lapped from the eaves up so wind-driven rain has a backup.

Ridge ventilation

New flashing and balanced ventilation finish the system to keep the attic and roof in balance.

Choosing a shingle

The roofer helps compare shingle types before materials are ordered.

Eave membrane

Self-adhering membrane is applied at the eaves and in valleys to seal around nails if water backs up.

Related service

Architectural Shingle Installation Oradell, NJ

Architectural shingles go on over the same deck, underlayment and starter as any shingle, with their own nailing pattern. The nails must land in the narrow area where the two laminated layers overlap, or the bottom layer can slip and the wind rating is lost. The ridge and hips get thicker cap shingles made for the line, not cut 3-tab pieces.

For Oradell homeowners, architectural shingle installation has become the default for new roofs. Their weight and laminated build give them higher wind ratings and a longer life. Color is worth picking in daylight against the brick or siding, since samples look different outdoors.

Related service

Asphalt Shingle Roof Installation Oradell, NJ

An asphalt shingle roof installation is the most common way to roof a house, and the details decide how well it performs. The shingles rarely fail first; the edges, nails and flashing do. It is fair to ask which underlayment and ice barrier will go on and where.

Most asphalt shingle installs in Oradell wrap up quickly once materials are on site. In cool months the sealant strips take longer to bond, and the edges get extra attention. Rain delays are normal because the deck has to stay dry.

Local help

Shingle Roof Installation Near Me

In Oradell, asphalt shingles remain the most common choice for new residential roofs. From Oradell out to neighboring towns such as Emerson, New Milford, Haworth and Paramus, houses built decades ago tend to need ventilation and flashing upgrades when they get a new shingle roof, and a shingle chosen for local wind and hail makes sense anywhere storms roll through. Searching for shingle roof installation near me? Ask how the flashing and ventilation will be handled.

For shingle roof installation in Oradell, NJ or nearby towns like Emerson, New Milford, Haworth and Paramus, call (551) 383-2310 to reach a roofer who covers your street.

Roofs in this climate

Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Oradell is busiest after a hard winter and before the next one.

Why call

Why not wait

Smaller repairs

A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.

Familiar with local homes

Roofers in Oradell know the roof types and weather wear common in local homes.

Clear next steps

Ask your questions before you agree to anything.

Shingle Roof Installation questions

How steep does a roof need to be for shingles?
Shingles are made for slopes of 2 in 12 and steeper. Roofs that are low but still within range get added underlayment protection. Porches and additions below that line need a low slope material.
What is the best season for a shingle roof installation?
Warm, dry days give the best results for a shingle install. Cold-weather installs are done regularly, with extra care for brittle shingles and hand sealing where the strips will not activate. Wet decking is the hard stop at any time of year.
What goes under the shingles on a new roof?
The layers beneath shingles are drip edge, ice barrier, underlayment and starter strip, in that general order. Synthetic underlayment has largely replaced felt because it is lighter, stronger and less likely to wrinkle or tear. Local code decides where ice barrier is required.
How many nails should each shingle have?
Nailing is what holds shingles down until the sealant bonds and long after. Four nails per shingle is common, with six where the shingle instructions or local code call for high-wind nailing. Each nail has to sit in the nailing zone, flush with the surface, not too high and not driven through.
Which is better, 3-tab or architectural shingles?
A 3-tab shingle is thin and uniform, and an architectural shingle is thicker, heavier and layered. Architectural shingles generally have higher wind ratings, last longer and have a textured look, which is why most new roofs use them. 3-tab can make sense on outbuildings or when matching an older roof.

More questions? Call (551) 383-2310

Related services

  • Shingle Roof Replacement

    Tearing off a worn shingle roof down to the decking and putting on a new one, so the new roof starts on a sound, dry deck.

    Learn more
  • Roof Installation

    Installing a new roof layer by layer, from drip edge and underlayment to flashing, vents and the finished roofing, so it sheds water at every edge and seam.

    Learn more
  • Roof Ventilation

    Fixing hot, damp or poorly vented attics with the right mix of intake and exhaust, without mixing vent types that work against each other.

    Learn more
  • Gutter Installation

    Gutter installation that carries roof water away from the siding, fascia and foundation, from K-style aluminum to half-round and copper.

    Learn more

Looking for something else?

See all roofing services

Talk to an Oradell roofer about shingle roof installation

Call (551) 383-2310 for a local roofer in Oradell and nearby towns.

Talk to a local roofer(551) 383-2310Call now

Free to call. No forms to fill out.

Call (551) 383-2310