Local roofersFree to callNo forms to fill out
Serving Oradell and nearby towns
Menu
Call (551) 383-2310
Roof Replacement

Roof Installation Oradell, NJ

A Oradell roofing contractor can install asphalt shingle, metal and other roofs, following the material maker's instructions for nailing, flashing and ventilation, because the details at edges, walls and valleys decide whether it leaks. Dial (551) 383-2310 to talk with a local roofer about installation.

A quality roofing material can still fail early if it is installed carelessly. Nails driven above the reinforced strip, flashing left out at a sidewall and short valleys are the kind of mistakes that show up within a few seasons. Those are details you cannot see from the yard, which is why the installer matters so much.

The first decision is what kind of roof to install. Dimensional shingles cover most houses, though metal, tile and synthetic products are growing, and each one installs differently. The slope of the roof limits the options, because shingles need a minimum pitch and nearly flat sections need a membrane roof.

A Oradell roofer will ask a handful of questions up front. Say whether the job is a tear-off, an addition or new construction, and whether you have a material or color picked out.

Many roof installation calls in Oradell also turn up a need for roof replacement or shingle roof installation.

Dealing with this in Oradell, NJ right now? Call (551) 383-2310 to reach a nearby roofing contractor.

Call now
The process

How roof installation works

A roof goes on from the bottom of the system to the top.

  1. Prepare the deck

    Before installation, the crew walks the decking and replaces soft or damaged sections. Nails cannot hold in soft wood, so this step is never skipped.

  2. Install the ice barrier

    Metal drip edge is installed at the eaves first, then self-adhering ice barrier covers the eaves and valleys. Codes in colder areas often require the ice barrier to reach a set distance inside the exterior wall.

  3. Lay the underlayment

    The remaining deck is covered with underlayment, overlapped at the seams and fastened on the maker's pattern. Synthetic is lighter, tears less and stays put better than felt if it rains mid-job.

  4. Set the flashing

    Step flashing is woven in with each course along sidewalls, counter flashing covers it at masonry, kickout flashing sits at the bottom of each wall line and new pipe boots go over every vent. Flashing is where most leaks start, so it is never just caulked in place.

  5. Lay the shingles

    After a starter course, the crew lays shingles row by row, keeping the exposure even and the nails inside the nail strip. Correct nailing is what lets the roof stand up to wind.

  6. Finish the ridge

    The crew opens a slot at the ridge for a ridge vent, or installs box vents, and finishes with cap shingles. Without enough soffit intake, a ridge vent cannot do its job.

What is included

Parts of a new roof

Underlayment

Ice and water shield at the eaves and valleys, with underlayment over the rest of the deck backs up the roofing in wind-driven rain.

The roofing

The finished roofing, installed to the maker's nailing and fastening pattern with fasteners placed where they belong.

Roof vents

Ridge vents or other exhaust paired with soffit intake for a drier attic all year.

Flashing

Step, counter and kickout flashing plus new pipe boots instead of reusing old metal.

Drip edge

Metal edges around the whole roof keeps water off the fascia boards.

Related service

New Roof Installation Oradell, NJ

New roof installation covers three common jobs: replacing a roof after tear-off, roofing a new home and roofing an addition. Additions take extra care, because the new roof has to tie into the old one with matching shingles, woven or flashed valleys and step flashing where the new roof meets an existing wall. Ask whether the new section will match the existing roofing or whether the whole roof should be redone.

Manufacturers publish exact steps for their products, and local code usually requires following them. A Oradell roofer should be able to explain how many nails per shingle will be used, what underlayment goes down and what ventilation the attic will have. Clear, specific answers are a good sign the details will be done right.

Related service

Roof Overlay Oradell, NJ

An overlay skips the tear-off and lays new shingles over the current roof. Building codes generally cap asphalt roofs at two layers, so an overlay is only possible on a roof with a single layer, and not over shingles that are badly curled, wet or sitting on soft decking. It saves the labor of a tear-off and keeps the house closed during the job.

An overlay comes with downsides worth weighing. The deck stays hidden, ice barrier cannot be applied directly to the wood and any wear in the old roof shows through the new one. When an overlay is proposed, ask how they confirmed there is only one layer and how the flashing will be handled.

Local help

Roof Installation Near Me

Roof installation in Oradell runs from full tear-offs on older homes to brand new roofs on additions and new houses. Across Oradell and nearby places including Emerson, New Milford, Haworth and Paramus, storms take the biggest toll on roofs that were installed with shortcuts, and a careful installation is what lets a new roof ride out years of weather.

For roof installation in Oradell, NJ or nearby towns like Emerson, New Milford, Haworth and Paramus, call (551) 383-2310 to reach a roofer who covers your street.

Roofs in this climate

Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Oradell is busiest after a hard winter and before the next one.

Why call

Why not wait

Less damage

Small roof problems caught early usually stay small repairs.

Familiar with local homes

Roofers in Oradell know the roof types and weather wear common in local homes.

Clear next steps

Ask the roofer about the cause, the options and the estimate before work starts.

Common questions about roof installation

What goes under a new roof?
The layers under the roofing are the drip edge, ice and water shield and a full layer of underlayment. Starter strip, step and kickout flashing and new pipe boots are also part of a proper installation.
Can a roof be installed in cold weather?
Cold weather does not stop a roof installation, but it changes the routine. Shingles can crack when cold, and the sealant may not activate until warm weather, so hand sealing is common. Ice and snow on the deck must be cleared before anything is installed.
Is a permit needed to install a new roof?
Most towns require a permit for a new roof or a full reroof, though rules vary. The roofing contractor usually pulls it, and an inspector may check the work.
Which roofing material is best for my house?
It comes down to pitch, budget, look and how long you want the roof to last. Dimensional shingles fit most houses, metal offers a long life, and heavy tile or slate may need the structure checked first. A Oradell roofer can lay out the trade-offs for your roof.
How long does it take to install a new roof?
For an average house, plan on one to three days. Complex roofs, heavy materials and bad weather all add time.

More questions? Call (551) 383-2310

Often needed together

  • Roof Replacement

    A complete new roof from the deck up when repairs no longer make sense, with the old layers removed and the deck checked.

    Learn more
  • Shingle Roof Installation

    New shingle roofs built layer by layer on a sound deck, with nailing and flashing done to the shingle instructions.

    Learn more
  • Metal Roof Installation

    Metal roof installation built around the right panel, finish and trim for the house, with high-temperature underlayment and proper flashing.

    Learn more
  • New Construction Roofing

    Getting new framing dried in fast and roofed to code, so the house is protected before interior work starts.

    Learn more

Looking for something else?

See all roofing services

Talk to an Oradell roofer about roof installation

Call (551) 383-2310 for a local roofer in Oradell and nearby towns.

Talk to a local roofer(551) 383-2310Call now

Free to call. No forms to fill out.

Call (551) 383-2310