Underlayment
A fresh underlayment layer and ice barrier at the eaves and valleys protect the deck as a second line of defense.
A Oradell roofing contractor can replace a roof that is too old or too damaged to patch, starting with a full tear-off and a check of the decking, with a written scope so you know exactly what is being replaced. One call to (551) 383-2310 reaches a nearby roofing contractor.
Replacement makes sense once the whole roof surface is failing, not just a single area. As shingles age they shed granules, turn brittle and curl at the edges, so leaks begin turning up in more than one spot at a time. The type of shingle and the number of layers already on the roof both shape when, and how, a replacement happens.
The visible roofing is only part of what gets replaced. Underneath are the deck boards or sheathing, the underlayment, ice and water shield at the eaves and valleys, metal drip edge, flashing at every wall and chimney, pipe boots and the vents that let the attic breathe. Skipping any of those parts is how a brand new roof ends up leaking in its first heavy rain.
It helps to write down when the roof went on, where stains have appeared and whether anyone has added a second layer. If the attic is easy to reach, check for dark, damp boards or pinholes of daylight while standing only on framing.
Roof Replacement is often paired with roof installation and shingle roof replacement, depending on the cause.
Need roof replacement in Oradell? Call (551) 383-2310 to reach a nearby roofing contractor.
Call nowEach step builds on the one before it, so the order matters.
The visit includes a look at the roof surface, the attic side of the deck and the flashing, plus measurements for materials. You should come away with a written scope that lists materials, layers to remove and who pulls the building permit most towns require.
The crew protects landscaping and siding, then strips every layer of shingles, underlayment and old flashing down to the wood. Only as much is torn off in a day as can be dried in by evening.
Any soft, cracked or water-stained sheathing is cut out and replaced, and loose boards are renailed.
Drip edge goes on at the eaves, ice and water shield in the valleys and along the eaves, then synthetic underlayment, starter strip, new flashing, pipe boots and finally the roofing. Correct nail placement and balanced ventilation matter as much as the roofing material.
Debris is hauled off and a rolling magnet sweeps the lawn, beds and driveway for nails. A final walk-through with you is the time to point out anything that looks off.
A fresh underlayment layer and ice barrier at the eaves and valleys protect the deck as a second line of defense.
Damaged sheathing is cut out and new panels go in and loose boards are renailed.
Worn flashing and cracked pipe boots are replaced rather than reused so the weak points match the new roof.
Every existing layer comes off and is disposed of which lets the crew see the decking.
Ventilation is reworked so intake and exhaust are balanced to keep heat and moisture out of the attic.
In the trade, reroofing simply means roofing a house that already has a roof, as opposed to roofing new construction. Building codes generally allow at most two layers of asphalt shingles, and an overlay is only an option when the existing roof is flat, dry and has a sound deck. That is why most roofers recommend tearing off, even when an overlay is technically allowed.
When you talk with an Oradell roofer about reroofing, ask how many layers are on the house now and how they will confirm it. Ask what happens to the existing flashing and pipe boots, because reusing them is a common shortcut.
During a tear-off, the crew strips the roof to bare wood using shovels and roofing forks, slope by slope. Old material is dropped into a dumpster or trailer while tarps and plywood guard the yard, windows and air conditioning unit.
Once the old roof is gone, every soft or rotted board is out in the open. Hidden rot around chimneys, skylights and valleys can be cut out, and old flashing that was buried under tar can be replaced.
The decking is the wood surface between the rafters and the roofing, usually plywood or OSB on newer homes and plank boards on older ones. When decking stays wet, it softens, sags between rafters and stops gripping nails.
Rotted sections are cut back to solid wood and replaced, and spaced plank decks may get a full layer of new plywood or OSB. Ask up front how the roofer will handle and document any decking replaced, so there are no surprises.
Roof replacement in Oradell covers a wide range of houses: older homes that may still carry two layers of shingles or plank decking, and newer ones whose first roof is simply reaching the end of its life. For homeowners in Oradell and nearby places including Emerson, New Milford, Haworth and Paramus, getting the old roof off before leaks reach the wood saves the biggest headaches, and a roofer can tell you whether you have a few years left or should plan the work now.
Searching for roof replacement near me from Oradell or Emerson, New Milford, Haworth and Paramus? Call (551) 383-2310 to talk to a roofer who works in your part of town.
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Oradell is busiest after a hard winter and before the next one.
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers in Oradell know the roof types and weather wear common in local homes.
Ask the roofer about the cause, the options and the estimate before work starts.
More questions? Call (551) 383-2310
Installing a new roof layer by layer, from drip edge and underlayment to flashing, vents and the finished roofing, so it sheds water at every edge and seam.
Learn moreTearing off a worn shingle roof down to the decking and putting on a new one, so the new roof starts on a sound, dry deck.
Learn moreReplacing a rusted or worn-out metal roof, or swapping an old shingle roof for new metal, with purlins and decking checked before new panels go on.
Learn moreHelp documenting hail and wind damage and meeting the insurance adjuster on the roof, from the first inspection to the repair.
Learn moreLooking for something else?
See all roofing servicesCall now for Oradell roof replacement and help in the towns around it.